Reed Made Speed
Switch-Pros Ground Block
Switch-Pros Ground Block
SKU:GB9100-0-5
Compartir
En existencias
No se pudo cargar la disponibilidad de retiro
So you bought a Switch-Pros RCR or 9100 Power Distribution Module (PDM) and are ready to wire it. But what will you do with all the ground wires from all the accessories you will now power? Don't worry—we've got you. Let me introduce the Switch-Pros Ground Block. We now offer a much cleaner and viable solution to remedy this with a single point to return your grounds. To maintain a sealed wiring harness, we start with the same types of connectors that come with your Switch-Pros RCR or 9100 and end with a 4 AWG black cable terminated and sealed to bring to your battery's negative post.
We also offer pig-tailed harnesses sized for the maximum current draw of each circuit with pre-terminated connectors, so you don't have to buy expensive terminal crimpers. They will be presented in 2 lengths to suit either the two-seaters at 5' and the four-seaters at 10' and will include soldered heat shrink butt connectors so each circuit can be cut to length. The harness kits can also include connectors at the accessory end to unplug accessories for maintenance.
What comes in the box
- Ground Block
- Plug and play 2.5-foot ground cable with 3/8" eyelets for the Ground Block end and 1/4" for the battery end.
- All stainless steel hardware for both mounting and cable connection.
If ordered with the harness, it will also include female connectors with pigtailed wires that are terminated and ready to plug in.
- Butt splice connectors are equipped with solder and heat shrink; no crimpers are needed, just a heat gun or butane lighter.
- 1 female connector for the start switch on all Can-Am models with a push-to-start switch
If ordered with accessory connectors, it will add on for the 9100 8ch:
- 4 male and female sealed connectors rated for 20A, with leads that are 6 inches long 14AWG.
- 4 male and female sealed connectors rated for 30A, with leads that are 6 inches long 10AWG.
- 8 sealed heat-shrink solder butt connectors.
For the RCR 12ch:
- 11 male and female sealed connectors rated for 20A, with leads that are 6 inches long 14AWG.
- 5 male and female sealed connectors rated for 35A, with leads that are 6 inches long 10AWG. -
- 32 sealed heat-shrink solder butt connectors.
Extra connectors will include pre-terminated and wired sealed connectors with 6-inch long leads.
- 4 sealed heat-shrink solder butt connectors appropriately sized for the selected connectors.
![Switch-Pros Ground Block](http://reedmadespeed.com/cdn/shop/files/9100_Ground_Block_2025-Feb-11.png?v=1739300802&width=1445)
![Switch-Pros Ground Block](http://reedmadespeed.com/cdn/shop/files/RCR_Ground_Block_2025-Feb-11.png?v=1739379761&width=1445)
![Switch-Pros Ground Block](http://reedmadespeed.com/cdn/shop/files/RCR_Ground_Block_90_2025-Feb-11.png?v=1739384187&width=1445)
![Switch-Pros Ground Block](http://reedmadespeed.com/cdn/shop/files/9100_Ground_Block_90_2025-Feb-14.png?v=1739586201&width=1445)