Do the Can-Am X3 Switch-Pros mounts fit the Maverick R?

No. The X3 and Maverick R have completely different dash layouts. Every Reed Made Speed mount is machined specifically for one platform — they are not interchangeable.

Does the Maverick R Switch-Pros mount require drilling?

No. Both the 9100 and RCR mounts pop directly into the factory dash opening on the Maverick R with no drilling or fabrication required.

What happens to the factory push start button when I install a Switch-Pros mount?

The factory push-start button location is now available. The Reed Made Speed Push Start Button Plug fills that opening cleanly with a precision-machined billet aluminum plug — no gaps, no rattles.

Why billet aluminum instead of 3D printed for Maverick R accessories?

6061-T6 billet aluminum is CNC-machined to thousandths-of-an-inch tolerances with a known, consistent strength profile. 3D printed parts have inherent layer-line weakness and tolerance variation that make them better suited for prototyping than finished off-road parts.

Can I order a custom configuration if mine isn't in stock?

Yes. Call Denny at 530-771-7594. Custom variants can be made to order with a 3-day to 2-week lead time.

Can-Am Maverick R Accessories: The Ultimate Upgrade Guide

April 5, 2026

The Can-Am Maverick R is one of the most capable UTVs ever built — a turbocharged, long-travel machine that demands accessories built to the same standard. At Reed Made Speed, we machine every part from aircraft-grade billet aluminum using only US materials and tools, so your Maverick R gets upgrades that match its engineering.

Why the Maverick R Needs Purpose-Built Accessories

The Maverick R's performance envelope is unlike any other side-by-side. With 225+ horsepower and suspension travel that swallows terrain whole, generic accessories simply don't cut it. Vibration, heat, and G-forces that would rattle a mass-produced part loose are no match for precision CNC-machined billet aluminum, with tolerances held to the thousandth of an inch.

Switch-Pros Mounts for the Maverick R

The Maverick R's dash is prime real estate. Our billet aluminum Switch-Pros mounts are machined specifically for the Maverick R, giving you a factory-integrated look for your Switch-Pros 9100 or RCR power distribution system. Both mounts pop directly into the factory dash opening — no drilling required.

Can-Am Maverick R Switch-Pros 8-Channel Mount — for the Switch-Pros 9100, drops into the dash with no drilling required.
Can-Am Maverick R 12-Channel Switch-Pros Mount — built for the RCR, giving you full 12-channel control in a clean billet package.

Both mounts are made in the USA with US materials and tools, and include all hardware for a straightforward DIY install.

Push Start Button Plug

Running a Switch-Pros system means your factory push start button location is freed up. Our Can-Am Maverick R Push Start Button Plug fills that opening cleanly with a precision-machined billet aluminum plug — no gaps, no rattles, no exposed holes. A small detail that makes a big difference in the finished look of your build.

Why Billet Aluminum?

Billet aluminum starts as a solid block of 6061-T6 aircraft-grade material and is machined to its final shape — not cast, not stamped, not injection-molded. The result is a part with superior strength, tighter tolerances, and a surface finish that looks as good as it performs. When you're pushing the Maverick R hard, you want parts that were built the same way.

Made in the USA — Not Just Assembled Here

Every Reed Made Speed part is made in the USA with US materials and tools. That means the aluminum billet, the cutting tools, and the machining all happen domestically. We're not importing blanks and finishing them — we're building from scratch, the right way.

Don't See Your Configuration?

Call Denny at 530-771-7594. We can make custom variants to order with a lead time of 3 days to 2 weeks. Every call turns into a sale because we make sure the fitment is perfect before anything ships.

Related Guides

Do the Can-Am X3 Switch-Pros mounts fit the Maverick R?: No. The X3 and Maverick R have completely different dash layouts. Every Reed Made Speed mount is machined specifically for one platform — they are not interchangeable.
Does the Maverick R Switch-Pros mount require drilling?: No. Both the 9100 and RCR mounts pop directly into the factory dash opening on the Maverick R with no drilling or fabrication required.
What happens to the factory push start button when I install a Switch-Pros mount?: The factory push-start button location is now available. The Reed Made Speed Push Start Button Plug fills that opening cleanly with a precision-machined billet aluminum plug — no gaps, no rattles.
Why billet aluminum instead of 3D printed for Maverick R accessories?: 6061-T6 billet aluminum is CNC-machined to thousandths-of-an-inch tolerances with a known, consistent strength profile. 3D printed parts have inherent layer-line weakness and tolerance variation that make them better suited for prototyping than finished off-road parts.
Can I order a custom configuration if mine isn't in stock?: Yes. Call Denny at 530-771-7594. Custom variants can be made to order with a 3-day to 2-week lead time.

Back to blog