How many accessories can the Switch-Pros 9100 control?

The 9100 has 8 outputs with a total system capacity of 125A. Outputs 1–4 are rated at 20A each, and outputs 5–8 are rated at 35A each.

Does the Switch-Pros 9100 require a smartphone to operate?

No — the switches on the panel work without the app. The app is used for programming, customization, and Bluetooth remote control. Once programmed, the system operates independently.

Is the Switch-Pros 9100 waterproof?

Yes. Both the switch panel and the power module are IP67-rated. The power module is rated for under-hood use from -40°C to 125°C.

What happens when a circuit trips on the Switch-Pros 9100?

The LED flashes three times and the output resets automatically. There are no fuses to replace — the solid-state overcurrent protection resets itself.

Do I need a special mount to install the Switch-Pros 9100 in my Can-Am?

Yes — the 9100 and RCR panels are different sizes and require different mounts. Reed Made Speed makes CNC-machined billet aluminum mounts specifically for the Can-Am X3 and Maverick R that integrate into the factory dash location with no drilling required.

Top 7 Benefits of Switch Pros 9100; Why It’s Worth the Upgrade

September 8, 2025

Step into almost any off-road garage, and you'll hear the same sigh: "My wiring is a mess." Lights, compressors, radios — every new gadget creates another relay, another fuse, another cable snake under the hood. After a few years, tracing a fault feels like solving a mystery novel. That's why the Switch-Pros 9100 exists. It turns tangled chaos into a tidy, weather-sealed brain for your UTV's electrical system.

Many technicians and DIYers have installed more of these than they can count. In fact, their achievement is recognized when every car owner stares at the neat panel and says, "Why didn't I do this sooner?" So, let's break down seven benefits that make this upgrade worth every penny.

1. Clean, Compact Power Distribution

Picture an engine bay on a Friday afternoon: wires zip-tied, half-hidden, and a fuse block teetering off a bracket. The Switch-Pros 9100 sweeps that away. One sealed module, eight outputs, and a healthy 125-amp capacity. Everything funnels into a single hub. Less clutter means faster installs and quicker troubleshooting when you are a hundred miles from pavement.

2. Full Programming Control Right from Your Phone

A decade ago, adjusting a switch meant rewiring. Now? Pull out your phone. With Bluetooth programming, you can rename circuits, pick backlight colors, or turn a button from latching to momentary without a screwdriver. Dome light too bright? Dial it down on the app. Need a compressor to cut off after five minutes? Two taps, done.

3. Solid-State Reliability, Fewer Bugs

Traditional relays click, arc, and eventually fail. Often, they die after one good mud bath. The Switch-Pros 9100 ditches moving parts in favor of solid-state MOSFET technology. No chatter, no worn contacts, no "is that fuse good?" moments. Plus, circuit protection resets automatically, so you're not stuck in the dark swapping fuses by flashlight.

4. Weatherproof Durability for Real-World Conditions

California's Central Valley summers bake engine bays above 150°F; winters bring fog that seeps into everything. The power module on the Switch-Pros 9100 shrugs it off. Sealed against water, dust, and mud, it laughs at the slop we hit on logging roads.

5. Flexible Activation and Smart Automation

Every rig has quirks. Maybe you want reverse lights to activate a rear camera. The Switch-Pros 9100 handles that with triggers. One master button can turn on an entire scene of lights.

6. User-Friendly, Customizable Interface

Climb into the cab after sunset. The panel glows a calm, dash-matched color. Each switch is clearly labeled, giving you freedom from mystery toggles. Need the air locker? One press. Want rock lights? Done.

7. Purpose-Built Mounting for the Can-Am X3 and Maverick R

Dash space is prime real estate — and where you mount your Switch-Pros 9100 matters. Our billet aluminum mounts are machined specifically for each platform, replacing the factory switch location for a clean, integrated look. No drilling, no guessing — they drop right in.

Why the Upgrade Makes Sense

When you layer these benefits, a pattern emerges: less wiring chaos leads to greater confidence. Modern UTVs run fridges, radios, air systems, and lighting zones. Old relay banks just can't keep pace without headaches. The Switch-Pros 9100 turns expansion into a calm "add another lead, tap a button" job instead of a weekend of solder burns.

Ready to Clean Up Your Wiring?

Tired of chasing blown fuses at midnight? The Switch-Pros 9100 turns that spaghetti harness into one calm, organized hub. Every Reed Made Speed product is made in the USA with US materials and tools. Questions? Call Denny at 530-771-7594.